WELCOME TO TCL SUPPORT

HOW CAN WE HELP?

How do I find my model number?

How to connect your cable or satellite receiver to your TCL Roku TV

There are 3 ways to enjoy your Cable or Satellite Service on your TCL Roku TV.  We recommend connecting your cable or satellite receiver using an HDMI cable. This is the easiest method to connect your devices, and provides the highest quality of video and sound.

  • HDMI input (Recommended connection method)
  • Composite RCA Cables (yellow, red, and white) input
  • Coaxial input

Please refer to the appropriate section below for instructions on how to connect your Cable or Satellite Receiver.

Section 1: Connecting with HDMI (Recommended)

  • With the TV powered off, connect the HDMI cable from your Cable or Satellite Receiver to the HDMI 1 input of your TCL Roku Television.
  • Power on your TCL Roku Television and from the Home Screen navigate to the HDMI 1 and press the OK button on your TCL Roku remote.

TIP: You can rename the HDMI Input (or any Input) by pressing the "*" button on your TCL Roku remote while the tile is highlighted. Select Rename Input and press the OK button. You can then select a different name/icon pair like Cable box or Satellite TV.

Section 2: Connecting with composite RCA Cables(yellow, red, and white)

  • With the TV powered off, connect the Video cable (yellow) from your Cable or Satellite Receiver to the RCA Video input (yellow) of your TCL R Roku Television.
  • With the TV powered off, connect the Right Audio cable (red) from your Cable or Satellite Receiver to the RCA Audio input (red) of your TCL Roku Television.
  • With the TV powered off, connect the Left Audio cable (white) from your Cable or Satellite Receiver to the RCA Audio input (white) of your TCL Roku Television.
  • Power on your TCL Roku Television and from the Home Screen navigate to the AV and press the OK button on your TCL Roku remote.

Tip: You can rename the AV Input (or any Input) by pressing the "*" button on your TCL Roku remote while the tile is highlighted. Select Rename Input and press the OK button. You can then select a different name/icon pair like Cable box or Satellite TV.

Section 3: Connecting with a Coaxial Cable

  1. With the TV powered off, screw the coaxial cable from your Cable or Satellite Receiver on to the Coaxial input of your TCL Roku Television.
  2. Power on your TCL Roku Television and from the Home Screen navigate to the Antenna TV tile, press the OK button on your TCL Roku remote.
  3. Select Start finding Channels and press the OK button on your TCL Roku remote.
    If prompted, select your time zone using the Up and Down Arrow button your TCL Roku remote,  press the OK button. Please Note: This step is only shown if you have not connected your TV to Wi-Fi.
  4. Select No, Channels 3 & 4 are needed
    Please note: If a VCR is connected from your Cable or Satellite Receiver to your TCL Roku TV then Select Yes, channels 3 & 4 are needed.
  5. Your TCL Roku Television will begin to scan for channels.
    Scanning for channels can take several minutes.
  6. When the channel scan is completed, the TV will display a message indicating the number of channels found and information about editing the channel lineup.
    You can choose:
    Done– keeps the current channel list and exits to the Antenna TV. Tunes the first channel found other than analog 3 or 4
    Search for channels again – in case they were expecting the TV to find more channels that it did. Searching for channels clears the channel list and starts over.

TIP:You can rename the Antenna TV (or any Input) by pressing the "*" button on your TCL Roku remote while the tile is highlighted. Select Rename Input and press the OK button. You can then select a different name/icon pair like Cable box or Satellite TV.

Was this article helpful?

Can’t find what you’re looking for?

TCL team awaits your every question.

Contact Us
x

How can we improve the content?